4 & 5 Litre Packs

Castrol EDGE with Titanium Fluid Strength Technology™ is Castrol�s strongest and most advanced range of engine oils.

Castrol EDGE 25W-50 is a mineral SAE 25W-50, API SG/CD, engine oil formulated for big bore street machines in petrol passenger and light commercial vehicles, naturally aspirated, supercharged or turbocharged.

Castrol EDGE 25W-50 is infused with liquid Titanium; it is one of Castrol�s strongest and most advanced range of engine oils. It has the adaptive strength to respond to your engines every need, giving it unique adaptive strength that reduces metal to metal contact across a range of different driving speeds, lowering friction and maximises engine performance.

Castrol EDGE 25W-50 gives you the confidence to demand maximum engine performance from big bore street machines. Castrol EDGE 25W-50 is proven in tests to deliver outstanding oil strength.

The exceptional characteristics of Castrol EDGE 25W-50 ensure that all engine components, from the valve train to the bearings are fully lubricated to provide optimum engine performanceand protection.

Castrol EDGE 25W-50 provides outstanding wear protection in big bore street machines and competition engines designed to run at their optimum level on higher viscosity mineral oils.

Castrol EDGE 25W-50 should be used in engines where maximum efficiency and protection is demanded.

Castrol EDGE 25W-50 is suitable for use in automotive gasoline engines where the manufacturer recommends an SAE 25W-50, API SG/CD or earlier specification 25W-50 lubricant.

Castrol EDGE 25W-50 is suitable for use in large in-board power and ski boats.

Castrol EDGE 25W-50 is suitable for use in veteran motorcycles and motor cars where high viscosity oils are specified or required.

Castrol EDGE 25W-50 is suitable for use in manual transmissions of cars and commercial vehicles where SAE 40 or 50 grade engine oils or SAE 90 �straight� (non EP) gear oils are recommended.

Castrol EDGE. Strength to Perform - Freedom to Drive.

When choosing oil, please refer to your owner�s handbook and the product specifications shown below. May also be suitable for other vehicles.

Available in pack multiples of three only.

Castrol Outboard 2T is an ashless 2 stroke outboard engine lubricant for use in oil injected and premix outboard engines. Castrol Outboard 2T is also suitable for water-cooled two stroke jet skis.

Castrol Outboard 2T provides a very good level of cleanliness and engine protection.

Castrol Outboard 2T is suitable for outboard engines with either oil injection or pre-mix type lubrication systems where NMMA TC-W3™ specification is called for. It can be used at fuel/oil ratios up to 100:1, always in accordance with manufacturer recommendation.

By exceeding TC-W3™ specifications, Castrol Outboard 2T is recommended where the previous specifications of TC-2, TC-W and TC-WII® are nominated.

Available in pack multiples of three only.