Nationwide New Zealand Delivery
Categories
Picture of 5"Drive Plate 1 3/8"x 6SPL for 6" Slip-Clutch - B4167

5"Drive Plate 1 3/8"x 6SPL for 6" Slip-Clutch - B4167

Drive Plate for 6" Slip-Clutch.

Dimensions:

1 3/8" x 6 spline Drive Plate 5" Outer Diameter.

1 1/8" Diameter Spigot.

Components designed to interchange with most 6" Slip Clutches and BARE-Co B4164 - B4166 - B4156 150mm (6") OD Clutches.

Suits BARE-Co B9164 150 mm (6") Safety Clutch.

Part Number: B4167
Vendor: Bare-Co
$119.01 incl GST

Related products

Picture of Safety Clutch 6"(40HP) 1 3/8" 6SPL - B4164
B4164

Safety Clutch 6"(40HP) 1 3/8" 6SPL - B4164

Safety Clutch.

Dimensions:

40 HP Capacity,

6" (150mm) Diameter,

A: 5.2" (130mm),

1 3/8" x 6 Spline Female,

1 3/8" x 6 Spline Male.

REMEMBER THIS!

To adjust Standard Duty (Silver or Gold Spring) BARE-Co PTO clutches:

Compress springs fully then back off 2 turns.

Fine tune so that the clutch slips occasionaly.

Once per year release springs completely and allow clutch to slip to polish pressure plate.

When Fitting Clutch:

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Re-tension Clamp Bolts after 10 Hours Use - then Every 100 Hours.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$269.61 incl GST
;
Picture of Safety Clutch 6"(40HP) 1 1/4"Fmx 1 3/8"Mx6SPL - B4166
B4166

Safety Clutch 6"(40HP) 1 1/4"Fmx 1 3/8"Mx6SPL - B4166

Safety Clutch.

Dimensions:

40 HP Capacity,

6" (150mm) Diameter,

A: 5.2" (130mm),

1 1/4" Round bore female (1/4" key),

1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust Standard Duty (Silver or Gold Spring) BARE-Co PTO clutches:

Compress springs fully then back off 2 turns.

Fine tune so that the clutch slips occasionaly.

Once per year release springs completely and allow clutch to slip to polish pressure plate.

When Fitting Clutch:

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Re-tension Clamp Bolts after 10 Hours Use - then Every 100 Hours.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$291.17 incl GST
;
Picture of Safety Clutch 6"(40HP) 1 3/8"Fmx 1 3/8"Mx6SPL - B4156
B4156

Safety Clutch 6"(40HP) 1 3/8"Fmx 1 3/8"Mx6SPL - B4156

Safety Clutch.

Dimensions:

40 HP Capacity,

6" (150mm) Diameter,

A: 5.2" (130mm),

1 3/8" Round bore female (3/8" key),

1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust Standard Duty (Silver or Gold Spring) BARE-Co PTO clutches:

Compress springs fully then back off 2 turns.

Fine tune so that the clutch slips occasionaly.

Once per year release springs completely and allow clutch to slip to polish pressure plate.

When Fitting Clutch:

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Re-tension Clamp Bolts after 10 Hours Use - then Every 100 Hours.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$291.17 incl GST
;
Information
Copyright © 2023 Parts Direct New Zealand. All rights reserved. Website by Enlighten Designs
Powered by nopCommerce A Power Farming website