- Register
- Log in
- Wishlist (0 items)
-
Cart
(0 items)
You have no items in your shopping cart.
- Tractor
-
Grass
-
Cultivation
- Spray
- Tools
-
Accessories
- Agricultural Gearboxes
- Agricultural Wheels
- Canopies & ROP Frames
- Chain
- Document Holder
-
Electrical
- Fuel System
-
Hydraulics
- Hydraulic Jacks
- Implement Jacks, Tow Balls & Towing Eyes
- Linkage
- Loader Brackets
- Lube Equipment
- Merchandise
- Monitor Mounting Solutions - RAM Mounts
- Post Hole Digger
- PTO Air Compressor & Tyre Gauge
-
PTO Driveline
- Ratchet Tie Downs
- Rubber Curtain
- Rubber Mounting Blocks
- Safety Product
- Sealants & Retaining Compounds
- Seats
- Shackles
- Silage Tines
- The "BARE" Essentials
- Wire Rope
- Filtration
-
Castrol Lubricants
- Suitable For
75 Ltr/min Flow
Hydraulic Motor 100cc (75L/min) 6SPL - B8705
Hydraulic Motor.
Features:
Ports - 7/8" UN "O" Ring.
Roller type Gear Stator.
Disc Valve linked to Roller Shaft via Drive Link.
Output shaft supported by tapered roller bearings.
High pressure motor seals.
Cross port relief required for pressure spikes.
These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics.
Maximum Flow: 75 L/min (20 US gal/min).
Hydraulic Motor 160cc (75L/min) 6SPL - B8706
Hydraulic Motor.
Features:
Ports - 7/8" UN "O" Ring.
Roller type Gear Stator.
Disc Valve linked to Roller Shaft via Drive Link.
Output shaft supported by tapered roller bearings.
High pressure motor seals.
Cross port relief required for pressure spikes.
These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics.
Maximum Flow: 75 L/min (20 US gal/min).
Hydraulic Motor 200cc (75L/min) 14SPL - B8702
Hydraulic Motor.
Features:
Ports - 7/8" UN "O" Ring.
Roller type Gear Stator.
Disc Valve linked to Roller Shaft via Drive Link.
Output shaft supported by tapered roller bearings.
High pressure motor seals.
Cross port relief required for pressure spikes.
These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics.
Maximum Flow: 75 L/min (20 US gal/min).
Hydraulic Motor 200cc (75L/min) 6SPL - B8703
Hydraulic Motor.
Features:
Ports - 7/8" UN "O" Ring.
Roller type Gear Stator.
Disc Valve linked to Roller Shaft via Drive Link.
Output shaft supported by tapered roller bearings.
High pressure motor seals.
Cross port relief required for pressure spikes.
These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics.
Maximum Flow: 75 L/min (20 US gal/min).
Hydraulic Motor 80cc (75L/min) 6SPL - B8704
Hydraulic Motor.
Features:
Ports - 7/8" UN "O" Ring.
Roller type Gear Stator.
Disc Valve linked to Roller Shaft via Drive Link.
Output shaft supported by tapered roller bearings.
High pressure motor seals.
Cross port relief required for pressure spikes.
These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics.
Maximum Flow: 75 L/min (20 US gal/min).