PTO End Yokes

Clamp Yoke for Rectangular Bar (Hardy Spicer Shafts).

1 3/8"x6 SPL,

HS 1310 Series.

Clutch Flange Yoke.

30.22mm x 106.5mm x 125mm (approx.) 7/W230 Series Shaft.

Fits HOWARD with rectangular bar shaft and 7 Series BYPY triangle tube shaft.

IMPORTANT: A723 Uni-Cross must be used with this Yoke 0.0015" (.04mm) smaller diameter than A700 Uni-Cross.

Clutch Flange Yoke.

35mm x 106.5mm x 125mm (approx.) 8/W240 Series Shaft.

Fits HOWARD with large 8 Series BYPY triangle tube shaft.

You may wish to also order A824 Uni-cross.

Cotter Clamp Bolt and Nut for 20 spline cotter type base.

Components designed to interchange with most 8" Slip Clutches and BARE-Co 200mm (8") OD Dual Plate Clutches.

Suitable for 200mm (8") 4 Plate Clutches.

Suits 200mm (8") Combined 4 Plate Freewheel Safety Clutch.

Suits BARE-Co 200mm (8") 6 Plate Clutch.

Flange Yoke.

Shaft Series:

1140 Series (23.6mm x61mm x67.5mm approx.),

W200 + W2200 Series (23.8mm x61mm x68mm approx.),

2 (23.8mm x61mm x68mm approx.).

Flange Yoke.

Shaft Series:

4 (27mm x 74.6mm x 83mm approx.)

1300 Series (27mm x74.6mm x81mm approx.),

4AG (27mm x74.6mm x83mm approx. inside circlips).

W210 + W2300 Series (27mm x74.6mm x83mm approx.).