Nationwide New Zealand Delivery

Heavy Duty Freewheel Safety Clutches

View as Grid List
Sort by
Display per page
B7251

Blue Torque HD Over Run Safety Clutch 8" (100HP) 1 3/4"x20SPL - B7251

Blue Torque Heavy Duty Freewheel Safety Clutch.

Dimensions:

100 HP Capacity,

8" (200mm) Diameter,

A: 7.3" (185mm),

1 3/4" x 20 spline male / female.

Heavy Duty Units allow PTO driven implements to freewheel with adjustable safety protection under load.

Prevents expensive damage to internal tractor PTO packs.

Prevents single clutch tractors from being driven forward by PTO over-run.

Integral heavy duty adjustable disc type safety clutch protects PTO drive line.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

Basic Spring Length 31.75mm (1 1/4").

Adjust to slip on overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$506.54 excl GST
;
B7249

Blue Torque HD Over Run Safety Clutch 8" (100HP) 1 3/8"6SPLx21SPL - B7249

Blue Torque Heavy Duty Freewheel Safety Clutch.

Dimensions:

100 HP Capacity,

8" (200mm) Diameter,

A: 7.3" (185mm),

1 3/8" x 6 spline male / 1 3/8" x 21 spline female.

Heavy Duty Units allow PTO driven implements to freewheel with adjustable safety protection under load.

Prevents expensive damage to internal tractor PTO packs.

Prevents single clutch tractors from being driven forward by PTO over-run.

Integral heavy duty adjustable disc type safety clutch protects PTO drive line.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

Basic Spring Length 31.75mm (1 1/4").

Adjust to slip on overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$506.54 excl GST
;
B7250

Blue Torque HD Over Run Safety Clutch 8" (100HP) 1 3/8"x6SPL - B7250

Blue Torque Heavy Duty Freewheel Safety Clutch.

Dimensions:

100 HP Capacity,

8" (200mm) Diameter,

A: 7.3" (185mm),

1 3/8" x 6 spline male / female.

Heavy Duty Units allow PTO driven implements to freewheel with adjustable safety protection under load.

Prevents expensive damage to internal tractor PTO packs.

Prevents single clutch tractors from being driven forward by PTO over-run.

Integral heavy duty adjustable disc type safety clutch protects PTO drive line.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

Basic Spring Length 31.75mm (1 1/4").

Adjust to slip on overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$506.54 excl GST
;
B7252

Blue Torque HD Over Run Safety Clutch 8" (150HP) 1 3/4"x20SPL - B7252

Blue Torque Heavy Duty Freewheel 4 Plate Safety Clutch.

Dimensions:

150 HP Capacity,

8" (200mm) Diameter,

A: 7.875" (200mm),

4 Plates.

1 3/4" x 20 spline male / female.

Heavy Duty Units allow PTO driven implements to freewheel with adjustable safety protection under load.

Prevents expensive damage to internal tractor PTO packs.

Prevents single clutch tractors from being driven forward by PTO over-run.

Integral heavy duty adjustable disc type safety clutch protects PTO drive line.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

Basic Spring Length 31.75mm (1 1/4").

Adjust to slip on overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$546.53 excl GST
;