Nationwide New Zealand Delivery

Heavy Duty Safety Clutches

View as Grid List
Sort by
Display per page
B7234

Blue Torque HD Safety Clutch 6" (100HP) 1 3/8"21SPLx6SPL - B7234

Blue Torque Heavy Duty 4 Plate Safety Clutch.

Dimensions:

100 HP Capacity,

6" (150mm) Diameter,

A: 5.7" (145mm),

4 Plates.

1 3/8" x 21 spline female / 1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

$329.25 excl GST
;
B7233

Blue Torque HD Safety Clutch 6" (100HP) 1 3/8"x6SPL - B7233

Blue Torque Heavy Duty 4 Plate Safety Clutch.

Dimensions:

100 HP Capacity,

6" (150mm) Diameter,

A: 5.7" (145mm),

4 Plates.

1 3/8" x 6 spline female / 1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$329.25 excl GST
;
B7231

Blue Torque HD Safety Clutch 6" (80HP) 1 3/4"Fmx 1 3/8"M - B7231

Blue Torque Heavy Duty Safety Clutch.

Dimensions:

80 HP Capacity,

6" (150mm) Diameter,

A: 5.2" (130mm),

1 3/4" x 20 spline female / 1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$259.94 excl GST
;
B7230

Blue Torque HD Safety Clutch 6" (80HP) 1 3/8"x6SPL - B7230

Blue Torque Heavy Duty Safety Clutch.

Dimensions:

80 HP Capacity,

6" (150mm) Diameter,

A: 5.2" (130mm),

1 3/8" x 6 spline female / 1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$239.94 excl GST
;
B7241

Blue Torque HD Safety Clutch 8" (100HP) 1 3/4"Fm 20SPLx 1 3/8"M 6SPL - B7241

Blue Torque Heavy Duty Safety Clutch.

Dimensions:

100 HP Capacity,

8" (200mm) Diameter,

A: 5.2" (130mm),

1 3/4" x 20 spline Female/ 1 3/8" x 6 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$306.59 excl GST
;
B7243

Blue Torque HD Safety Clutch 8" (100HP) 1 3/4"Fm 6SPLx 1 3/8"M 20SPL - B7243

Blue Torque Heavy Duty Safety Clutch.

Dimensions:

100 HP Capacity,

8" (200mm) Diameter,

A: 5.2" (130mm),

1 3/4" x 6 spline Female/ 1 3/4" x 20 spline male.

REMEMBER THIS!

To adjust these BARE-Co PTO clutches:

For 150 mm (6") Diameter Clutch - Basic Spring Length 28.6mm (1 1/8").

For 200 mm (8") Diameter Clutch - Basic Spring Length 31.75mm (1 1/4").

Adjust to Slip on Overload.

At 6 Months, back off to polish discs.

Tighten Shaft Clamping Bolts as Below. Repeat after 8 Hours + every 40 hours.

Pair of 1/2" dia Clamp Bolts - 75 ft lbs,

Pair of 5/8 " dia Clamp Bolts - 150 ft lbs,

Single Cotter Clamp Bolt - 100 ft lbs.

Note: LOOSE BOLTS - STRIPPED SPLINES.

$346.58 excl GST
;